Fully welded ball valve, 1/2"-56", DBB struction, fire safe design

Kelite Valves is famous for manufacturing fully welded ball valves in China market, we have made 56”CL600 fully welded ball valves for Iran market, a special technique was performed so that post welding heat treatment is not required so soft seals will not to be damaged during the welding process to make sure the seals good performance.

Pressure range: : 150LB-3000LB(PN6-PN420)

Size range: 1/2inch(DN15)-48inch(DN15-DN1200)

Design standard: API6D,BS5351,GB/T12237

Test standard: API607, DIN3230, GB/T13927

Material of the valve:: A105.LF2. F304.F304L.F316.F316L.F51.MONEL

Applicable temperature: 196℃-600℃

Applicable medium: Oil,Gas,Water,Sulfuric acid and nitric acid.

Connection type: Fully welded

Kelite fully welding ball valves design characteristic:

• KELITE fully welded ball valves are used in pipelines, pumping and compression stations, offshore, onshore, subsea and cryogenic as well as abrasive and high temp applications.
• The extensive size range and pressure class are available in a variety of materials including Carbon, Alloy & Stainless steel suitable for general to severe service conditions.
• The KELITE fully welding ball valves are available with Double Block & Bleed independent of the seat type.
• Single piston effect (SPE) is the standard feature for the seat rings of the KELITE fully welding ball valves.
  On a SPE seat ring: The pressure acting on the upstream side of the seat ring generates a force which push the seat towards the ball.The pressure acting on the downstream side of the seat ring generates a force which pull the seat ring away from the ball.
  Any overpressure which may be generated by the thermal expansion of the fluid trapped in the body cavity with the ball in fully closed position, will be automatically discharged in the line on the lower pressure side.
• Double piston effect (DPE) is a standard feature for the seat rings of the KELITE fully welding ball valves & recommended for welded body valves. On a DPE seat ring, both the pressure acting on the upstream side of the seat ring and the pressure acting on the down stream side of the seat ring, generate a force which push the seat towards the ball. With this type of seat ring, the eventual overpressure which may be generated by the thermal expansion of the fluid trapped in the body cavity with the ball in fully closed position, can be discharged by the use of an external safety relief device. The Double Piston Effect grants a double sealing feature, if the upstream seat ring is damaged, the down stream seat grant the sealing feature of the valve.

Kelite Valve is a leading manufacturer of quality valve products including cast steel, and forged steel Ball, Gate, Globe, Check, Butterfly and Plug valves. Our diverse product line is utilized in virtually all industries including Power, Chemical, Petrochemical, Oil and Gas,Pulp and Paper.

Designed and engineered to the highest possible standards, our valve range is found in a substantial array of applications in almost all industries; from Petrochemical, Oil and Gas, Chemical, to power generation, Pulp and Paper.

Accredited worldwide by respected companies for over two decades, your valve requirements translates into our commitment of offering a quality product line at competitive prices. Kelite Group and its experienced team will meet, and exceed your expectations. 

"Constantly pursue and innovate" is the spirit of the Kelite Group, “AlI consideration for the customers" is the marketing purpose of Kelite Group, We would like to provide more and more products with better quality and service, so as to meet the different requirements of our customers. We hope that more and more customers choose to use our products. Look forward to cooperating with your esteemed company in the near future.